- Комментарий (0)
- 07 ноя. 2015
Как Сделать Золотую Талиевую Цепочку с Кисточками и Стеклянными Бусинами
Резюме: Если вы ищете дизайн ювелирных украшений для золотых талиевых цепей, то эта статья будет на ваш вкус! Посмотрите как сделать эту золотую талиевую цепочку с кисточками и стеклянными бусинами.
Если вы являетесь фанатами модных украшений для тела, этот проект изготовления ювелирного украшения золотой талиевой цепочки будет хорошим выбором для вас. Эта талиевая цепочка с жемчугом и стеклянными бусинами подчеркивает ее элегантность. Она особенно подходит для вечеринки и свадьбы.
Материалы для изготовления золотой талиевой цепочки с кисточками и подвесками:
Instructions on making the gold waist chain with pearl and dangle designs:
Step 1: Make gold chain tassels
1st, snip off several pieces of 10cm gold cross chains (the amount is up to you) and a longer chain(15cm), and attach them to a gold jump ring respectively;
2nd, prepare several headpins, and thread a 6mm pearl bead to each of them and then make loops at the ends of the headpins;
3rd, hook the pearl dangles to the short chains (leave the 15cm gold chain alone) one by one and tighten.
Step 2: Add glass bead dangle
1st, thread a 8mm transparent glass bead to a gold eye pin, and a brown 15mmX10mm brown drop glass bead to a headpin;
2nd, connect the glass bead drop with each other and attach to the end of the longest gold chain among the tassel.
Step 3: Connect the gold tassels with rhinestone and pearl pendent
1st, stick a pearl and rhinestone pendent bead to the silver Tibetan style link with hot glues;
2nd, hook the gold chain tassels to the loop at the end of the 10mm transparent glass bead.
Step 4: Stick the rhinestone and pearl flower pendent to the brass filigree finding
1st, clasp the iron brooch pin to the brass filigree finding, and stick a pearl and rhinestone pendent to the brass filigree finding;
2nd, connect another pearl and rhinestone pendent to the brass filigree finding with a jump ring.
Step 5: Attach waist chains to kilt Pins
1st, snip off 10 pieces of gold chains, and connect both ends of them with jump rings respectively;
2nd, attach one end of the gold chain to the kilt pin's hole, and the other end to the brass filigree finding;
3rd,connect the chains one by one until you finish it like what is shown in the picture.
Step 6: Add pearl chain ornament
1st, prepare enough gold eye pins, and thread a white pearl bead to each eye pin, and make loops at the pin's end on by one;
2nd, connect the pearls in orders and make 4 pieces of pearl strands (2 long and 2 short);
3rd, connect the 2 short pearl chains to the gold jump ring at the top of the tassels, and the rest 2 pearl chains to the cross chain tassels at sides.
Look at the final piece of the gold waist chain with tassels and dangles design. Don't you think it elegant?
Pearl beads are favored by many people because of its elegance and purity. In this waist chain DIY, I chose white pearl beads and transparent glass bead to be great ornaments. Go ahead and have a try if you love it. Good Luck!