How to Finish a Cool Flat Hemp Bracelet in a Fresh Style
Summary: This guide will lead you to finish a cool flat hemp bracelet in a fresh style. With this tutorial, you will find another way of making marvelous macrame bracelet.
Literally, a hemp bracelet is a type of bracelet made with natural hemp twine, which is much more light and durable than others. One chooses to wear cool hemp bracelets is always a person full of challenging and innovative inspirit. In the following contents, I will show you how to finish cool flat hemp bracelet in a fresh style. (In order to make you read the figures clearly, I replaced all hemp twine strands with the colorful nylon threads.)
Materials used in making cool flat hemp bracelet:
1mm Nylon Thread
Instructions for making cool flat hemp bracelet?
Step1: Preparations for flat hemp bracelet
Yellow-green string: 220cm
Green string: 220cm
Red string: 70cm
Step2: Loop the closure ring and insert the red holding ends
1st, take the two long green thread stripes and start to make Larks Head Knot at their central location, about 2~3cm is ok;
2nd, finish the ring by tying a Chinese Snake Knot with two thread groups. Before you tighten the knot, insert the red thread as holding end. Adjust the thread to ensure it stop at center position as well.
Step3: Braid the flat hemp bracelet
1st, take the two working ends on left side and tie the basic square knot twice;
2nd, then repeat the same processes for right side;
3rd, next replace the two inner green workings to form a cross in center;
4th, repeat the above three processes for whole hemp bracelet body.
5th, until the length fit your wrist, you will see the final bracelet effect as below:
Step4: Finish the cool hemp bracelet
Simply tie one or two overhand knots with all 6 thread strands.
Likewise, using the hemp twine instead the nylon thread and you will get your cool flat hemp bracelet. To get more different types of string bracelets, welcome to visit here.