Learning Jewelry Making- Create Personalized Charm Necklaces with Red Copper Wire

If you have coils of red wire that are left at the bottom of your supplies box, what crafts could you possibly make with them? This tutorial is super appropriate for you if you don’t know! We’ll show you how to create a personalized charm necklace with wire wrapping techniques. Start learning jewelry making now!

Materials and tools:

1.5mm red aluminum wire

0.5mm red copper wire

0.5mm chocolate copper wire

Silvery iron chain

Round nose pliers

Flat nose pliers

Wire cutters

Instructions:

Step 1: make an oval loop

1st, snip a piece of aluminum wire that measures about 20cm;

2nd, cross both ends to shape an oval pattern;

3rd, bend both ends at the junction point, bring them into parallel straight lines;

4th, squeeze them together with plier;

5th, coil with red copper wire from the junction point;

6th, after coiling, loop the rest of the wire with round nose pliers;

7th, cut off excess wire and close the loop.

The finished loop is like this:

Step 2: finish the oval pendant

1st, pick a piece of aluminum wire, around which you will coil the red copper wire;

2nd, when the coiling reaches 12cm, remove it off the aluminum wire and cut off the extra red copper wire;

3rd, pick a piece of 20cm brown copper wire and coil it around the oval loop;

4th, after 8 times of coiling, thread red copper coil onto brown wire and continue wrapping around oval loop;

5th, coil the brown wire on the aluminum wire to secure in place.

Step 3: attach pendant to chain

Snip a piece of chain that measures about 30cm, thread it through the loop of the pendant, and combine end links with a jump ring.

The final look is like this:

Tada! The personalized charm necklace tutorial is over. Everyone has unpredictable possibilities in becoming a great jewelry designer while devoting time and energy into learning jewelry making. Never look down upon yourself, you can accomplish anything you set your mind to!