Wire Jewelry Making Design-Long Pearl Necklace and Earrings
Summary: Wire jewelry making project for making your own long pearl necklace and earrings using simple wire wrapped link techniques. The final pattern is super attractive!
Zinc Alloy Lobster Claw Clasps, Golden, about 12.5mm long, 7mm wide, 3mm thick, hole: 1.5mm(E502Y-G)
Unit: 1000 pcs Weight: 425(g)
US $5.55 / 1000 pcs
Brass Wire, Nickel Free, Golden, 0.3mm, 25m/roll(CW0.3mm007)
Unit: 10 Rolls Weight: 310(g)
US $6.10 / 10 Rolls
Imitation Pearl Acrylic Beads, Half Drilled, Flat Round, Snow, 6x6x2.5mm, Hole: 1mm(SACR-R701-6x2.5mm-24)
Unit: 10000 pcs Weight: 667(g)
US $9.15 / 10000 pcs
Iron JumpRings, Close but Unsoldered, Nickel Free, Golden, about 5500pcs/500g, 0.7mm thick(NFJRG6mm)
Unit: 1000 g Weight: 1150(g)
US $5.79 / 1000 g
Brass Lever Back Hoop Earrings, Lead Free and Cadmium Free, Silver Color, Size: about 10mm wide, 15mm long, hole: 1mm(EC223-S)
Unit: 500 pcs Weight: 190(g)
US $12.20 / 500 pcs
Brass Chain, Golden Color, Link: about 2mm long, 1.5mm wide, 1mm thick, 92m/Roll(CHC010Y-G)
Unit: 92 m Weight: 583(g)
US $9.95 / 92 m
A Set of Three Pliers with a Container, Ferronickel, 12cmx16cmx2.8cm(P011Y)
Unit: 1 Set Weight: 460(g)
US $4.76 / 1 Set
Wearing a pearl necklace and earrings the correct way will help you look elegant and fashionable at the same time, especially with a long necklace decorated with glossy pearl beads. In the project, I will just show you how to create such wonderful pieces out of wire jewelry making techniques.
Supplies needed for this wire jewelry making project:
6mm Acrylic Pear Bead
0.3mm Brass Wire (Silver or Gold)
Flat Nose Plier
Side Cutting Plier
Round Nose Plier
How to create your long pearl necklace and earrings set?
Step 1: prepare an odd number of 10~11cm long chain segments, such as 11, 13 or 15.
Step 2: connect the chain strands using the wire wrap link technique. You can start by wrapping a messy loop firstly. Then, slide one 8mm pearl bead and another chain strand, make another messy loop.
Keep on working more beaded links to combine the chain.
Step 3: When all the chains are connected by pearl links, lift the necklace to find the position where you will attach on the clasp and jumpring.
In my case, I choose the two locations to make the necklace an uneven pattern.
Attach on the clasp and jumpring at proper points.
There, you’ve finished the long necklace now!
Step 1: make several 6mm pearl bead links.
Step 2: assemble 5 pieces of them into a chain using small-sized jumprings.
Step 3: string the 3 strands on another wire and create a loop with the wire.
Step 4: thread another 8mm pearl bead on and then the earring hook. Loop the end.
It’s often difficult to find matching sets of long pearl necklace and earrings. This wire jewelry making technique might just help you solve that problem! If you want to own the set, just have a try!