Unique jewelry design-individual handmade beaded earrings
Summary: Make this pair of handmade beaded earrings with the following easy to do instructions. You can freshen up any outfit with this unique jewelry design!
Iron Earring Hooks, Silver Color, Size: about 18mm long, 18mm wide, 0.8mm thick, hole: 2mm(E135-S)
Unit: 5000 pcs Weight: 1176(g)
US $10.37 / 5000 pcs
Brass Wire, Nickel Free, Golden, 0.5mm, 9.5m/roll(CW0.5mm007)
Unit: 10 Rolls Weight: 264(g)
US $6.10 / 10 Rolls
Shell Pearl Beads Strands, Grade A, Polished, Dyed, Blue, Round, about 10mm in diameter, hole: about 0.8~1.0mm, about 41pcs/strand(SP10MM637)
Unit: 5 strands Weight: 341(g)
US $12.80 / 5 strands
JumpRings, Double Loops, Brass, Silver Color, about 6mm in diameter, 0.8mm thick(JRDC6MM-S)
Unit: 10000 pcs Weight: 725(g)
US $13.87 / 10000 pcs
Brass Twist Chains, Come On Reel, Oval, Golden, about 2mm long, 1mm wide, 0.35mm thick, about 92m/roll(CHC-S100-0.35mm-G)
Unit: 92 m Weight: 358(g)
US $10.72 / 92 m
Jewelry Pliers Sets, Ferronickel, Black, 11~12.5cm, 3pcs/sets(PT-MSMC001-M1)
Unit: 1 Set Weight: 202(g)
US $2.65 / 1 Set
Do you remember a time when you completely fell in love with a jewelry design? Well it happened to me several months ago. While I was suffering the internet, I came across a pair of handmade beaded earrings. I would describe it as chain caged pearl earrings. So, I decided to make and show you the project here. I hope that you also love this unique jewelry design.
Things you’ll need in handmade beaded earrings:
10 mm Pearl Beads
0.5mm Brass Wire
Flat Nose Plier
Round Nose Plier
Side Cutting Plier
Instructions on the unique jewelry design:
Step 1: Cut a long piece of brass wire and make a wire-wrapped loop at one end.
Step 2: Take a 50cm long chain segment and thread it onto the wire as picture shows. Each section can differ in length.
Step 3: Add on the pearl bead.
Step 4: Thread the three strands of chain onto wire again as to form a cage. The locations may entirely depend on your individual preference.
Step 5: Make another wire-wrapped loop above the bead using round nose pliers.
Step 6: Add on the earrings hooks.
Repeat the same steps to make the second earring.
This design is pretty versatile and really punk as well. In my handmade beaded earrings tutorial, I only use of one type of chain; however, you can also try several chains and sizes. The tangled chain cage highlights the entire unique jewelry design idea. Feel free to have a try.