Wrapped herringbone- makes your beads into a perfect link
Summary: Seeing wrapped herringbone, you may think it is very difficult to make. But you will find it is so easy when you follow our steps. So let’s get started to make it.
Step1: Make a loop around your round nose pliers.
Step2: Wrap the short piece of the wire around the longer piece.
Step3: String a bead onto the wire and repeat step1, step2 for the other end of the wire. Make sure it will be the same with another side of the bead.
Step4: Weave form the wire around one side of the bead and lay the wire over the top of the first wrapped coil.
Step5: Make one wrap around the wrapped coil.
Step6: Form the wire around the other side of the bead and make one wrap around the wrapped coil.
Step7: Repeat the pattern until you have reached the top of the coil.
Step8: Make one extra wrap around the wrapped coil and cut off the extra wire with wire cutters.
Step9: Use round nose pliers to squeeze the end of the wire.
Step10: So you get a wrapped herringbone!
You can match wrapped herringbones with other links to form a bracelet and necklace.