Wire Wrapped Triangle Bail Tutorial- Make Bead into a Pendant

Instructions on making a wire wrapped triangle bail:

Step1: Cut 4 inches piece of wire and slide a drop shape bead onto it.

Step2: With your finger, make the wires cross to be a triangle. Make sure the short piece is in front of the longer piece.

Step3: Bend the short piece down to right angle and use chain nose pliers to bend the longer piece of wire straight up forming a right angle between the two wires.

Step4: Wrap the short piece of wire around the longer piece about 3 or 4 wraps.

Step5: Cut the short tail as close as possible with wire cutters.

Step6: Bend the wire toward left and then pull the wire around the round nose pliers until the loop is completely round.

Step7: Use your fingers to wrap the wire around the base wire down to the first wrap. Then cut off the extra wire with wire cutters.

Step8: So you have created a wire wrapped triangle bail now!

Your pendant will not be bald after you make a small change to it.