- Comments (0)
- Feb 14, 2017
PandaHall Original DIY Project – How to Make a Wire Wrapped Gemstone Bangle Bracelet
Summary: Druzy pendants are one of our most popular products, so today we’d like to show you how to make a wire wrapped bangle bracelet with druzy agate pendant decorated. Enjoy!
To make this gemstone bangle bracelet, you just need to prepare a druzy agate gemstone pendant and 2 different sized jewelry wires, then you can easily make them to a bangle bracelet with your pliers.
Supplies needed to make the gemstone bangle bracelet:
Druzy Agate Pendant
3mm Wide Aluminum Wire
1mm Copper Wire
Round Nose Pliers
Long Nose Pliers
Side Cutting Pliers
How to make the wire wrapped bangle bracelet:
Step 1: Wrap the agate pendant with copper wire
1st, cut about 20cm copper wire, wrap a loop at one end of the wire;
2nd, wrap the wire around the agate pendant like the picture shows.
Step 2: Make one side of the wire wrapped bangle bracelet
1st, cut about 15cm (here the length depends on the size of your wrist) of 3mm aluminum wire, make a loop at one end of the wire;
2nd, thread the copper wire through the aluminum wire loop, and twist the copper wire around the aluminum wire like the picture shows.
Step 3: Make the other side of the wire wrapped bangle bracelet
1st, cut another piece of 20cm copper wire and wrap it to the agate pendant like we’ve done in step 1;
2nd, cut another piece of 15cm aluminum wire, make a loop at one end and wrap the copper wire around the aluminum wire like we’ve done in step 2.
Step 4: Complete the wire wrapped bangle bracelet
1st, make a loop at each of the aluminum wire ends, twist the copper wires to the loops to fix them;
2nd, bend the wires into a bangle.
Here is the finished gemstone bangle bracelet:
It will be like this when you’re wearing it:
If you don’t like dark color gemstones, you can use a light color or bright color one to make this bracelet, just as you can see from this tutorial, it’s quite easy to make. So, don’t hesitate, just give it a try!