Pandahall DIY Project on How to Make Nylon Thread Braided Bracelet with Glass European Beads

Do you know glass European beads? If not, you will learn a lot about this kind of beads. You should never miss this Pandahall tutorial if you are interested in braided bracelet. Now, I am going to show you how to make nylon thread braided bracelet with glass European beads. Hoping you will have a nice try!

Materials and tools needed for this nylon thread braided bracelet:

14x8mm Mixed Color Glass European Beads
1mm DarkTurquoise Nylon Thread
6x3mm Silver Rhinestone Spacers Beads
Scissors
Lighter
Black Clamp

Instruction on how to make nylon thread braided bracelet:

Step 1: make the first part of the nylon thread braided bracelet

1st, cut off four pieces of 1mm darkturquoise nylon thread, then clip them with the black clamp;
2nd, thread the two side pieces of nylon thread into the middle part to make a knot (as shown in the picture);
3rd, tighten the threads and make a second knot in the same way, then tighten the part.

Step 2: make the second part of the nylon thread braided bracelet

1st, continue to make another three knots with the nylon thread, then slide two 6x3mm rhinestone spacer beads onto the two first and fourth nylon thread, then make a simple knot with the first and fourth thread;
2nd, continue to make a same knot then add sliver rhinestone spacer beads;
3rd, slide fourteen European beads in total and make a tight knot (as shown in the picture).

Step 3: make the third part of the nylon thread braided bracelet

1st, slide a glass European bead onto the middle two nylon threads, then thread the two side threads to make a knot;
2nd, tighten the thread and continue to add another European bead;
3rd, continue to make knots and add beads, stop it after you get four glass European beads.

Step 4: make the fourth part of the nylon thread braided bracelet

1st, make a tight knot and slide two rhinestone spacer beads onto the two side threads;
2nd, continue to add more spacer beads and make the same correspondent pattern with the step 2;
3rd, make another four knots, then tighten the part;
4th, cut off the two side nylon threads and fix them by a lighter (as shown in the picture).

Step 5: finish the nylon thread braided bracelet

1st, take a piece of nylon thread and tie the two ends of the nylon threads, then make another a square knot;
2nd, slide two spacer beads onto the four threads, then make a simple loop at the ends to finish the nylon thread bracelet making.

Here is the final look of the nylon thread braided bracelet with glass European beads:

Now, have you figured out how to make it? You can prepare the materials firstly, then make this braided bracelet step by step. Trust me, you can finish alone if you are willing to try it. Different colored nylon threads can be selected to make this braided bracelet. See you!