How to Make Simple Glass and Bulge Beaded Ring

Summary: Love simple beaded ring? Then follow me to check this Pandahall tutorial on how to make simple glass and bulge beaded ring.

How to Make Simple Glass and Bulge Beaded Ring

You should collect this project if you love beaded ring all the time. Today I am going to show you a Pandahall tutorial on how to make simple glass and bulged beaded ring. Have any interest for this simple beading ring? Then let’s see the details together.

Supplies needed for this simple glass and bulge beaded ring:

6MM Bicone Black Glass Beads
4MM Golden Brass Smooth Round Beads
4.6x1.8MM Wheat Bulge Beads
6x1.8MM Purple Bulge Beads
Lightgrey Tiger Wire
Scissors

Supplies needed for this simple glass and bulge beaded ring:

Instruction on how to make simple glass and bulge beaded ring:

Step 1: Prepare the glass beads part

1st, cut off two pieces of tiger wire and slide a 6mm black glass bead onto both wires;
2nd, slide two black glass beads onto one piece of wire from two sides;
3rd, cross a glass bead through the upper wire and tighten the part.

Prepare the glass beads part

Step 2: Add brass beads and bulge beads

1st, slide four wheat bulge beads onto the piece of lower wire and cross a brass bead through the two wires, then tighten the wire;
2nd, add four wheat bulge beads onto the lower wire and cross the wires through the upper black glass bead.

Add brass beads and bulge beads

Step 3: Make another two same patterns

1st, slide two glass beads onto upper wire and cross the wires through another glass beads, then tighten the wire;
2nd, slide four wheat bulge beads onto the lower wire and cross a brass bead;
3rd, add another four bulge beads onto it and cross the wires through the upper glass bead; 4th, make another same beaded pattern with the same steps.

Make another two same patterns

Step 4: Finish this simple glass and bulge beaded ring

1st, thread the upper right wires through the several glass beads and do the same with the left wires;
2nd, slide four brass beads onto the wires respectively and slide four black glass beads, then ass four purple bulge beads and four brass beads onto it (as shown in the picture);
3rd, continue to slide five brass beads onto the wires and cross the all wires through the center bead, then tighten the wires and cut off the extra wires.

Finish this simple glass and bulge beaded ring

Now this simple glass and bulge beaded ring has been finished!

Now this simple glass and bulge beaded ring has been finished!

See this beading ring, have you figured out the skills of the beaded ring making? You can just check the step again if you have no idea how to do it. It is OK to leave a comment to tell me anything you do not understand. Anyway, just take an action and make a cool beaded ring for yourself.

400 / 400

Comments (1)

Feb 13, 2018 at 04:33 PM Abigail Dep

Thanks I"ll try it out.