Easy Pandahall Tutorial - How to Make a Pair of Acrylic Bead Drop Earrings

There are many DIY bead drop earrings on our website. In today's DIY project, you can see pair of acrylic bead drop earrings. It's a piece of cake to make the acrylic bead drop earrings just in a few minutes. Follow the simple tutorial below to see how to make the acrylic bead drop earrings.

Materials and tools needed in DIY the acrylic bead drop earrings:

6x4mm Purple Electroplate Glass Beads
13x8x5.5mm Drop Acrylic Rhinestone Montee Beads
4mm Clear Bicone Glass Beads
12x6mm Drop Eletroplated Glass Beads
0.3mm Golden Copper Wire
Golden Earring Hooks
Stainless-Steel Scissor

Instructions on how to make the acrylic bead drop earrings:

Step 1: Make the first part of the acrylic bead drop earrings

1st, cut a piece of 0.3mm golden copper wire and thread a 13x8x5.5mm drop acrylic rhinestone montee bead to it;
2nd, add a 13x8x5.5mm drop acrylic rhinestone montee bead on the two sides of the middle drop acrylic rhinestone montee bead respectively(as shown in the picture);
3rd, fix the drop acrylic beads by wrapping the copper wire (as shown in the picture);
4th, add another 13x8x5.5mm drop acrylic rhinestone montee bead and fix the bead by wrapping the copper wire (as shown in the picture).

Step 2: Make the second part of the acrylic bead drop earrings

1st, add a 6x4mm purple electroplate glass bead to the two copper wires respectively (as shown in the picture);
2nd, fix the purple glass beads by wrapping the copper wire(as shown in the picture);
3rd, refer to the above steps to add 2 6x4mm purple electroplate glass beads on the other side (as shown in the picture).

Step 3: Make the third part of the acrylic bead drop earrings

1st, add a 4mm clear bicone glass bead to the two copper wires respectively. Then, fix the two clear glass beads by wrapping the two copper wires (as shown in the picture);
2nd, cross the two copper wires through a 12x6mm blue drop eletroplated glass bead(as shown in the picture);
3rd, wrap the copper wire around the top part of the blue drop eletroplated glass bead and cut off the excess copper wires(as shown in the picture);
4th, cut another piece of golden copper wire and thread it through the top 3x8x5.5mm drop acrylic rhinestone montee bead. Then, add a 4mm clear bicone glass bead to the two copper wires respectively(as shown in the picture);
5th, hold the two copper wires together and add a blue electroplate glass bead (as shown in the picture);
6th, add a golden earring hoop on the top of the glass bead earring and cut off the excess copper wires(as shown in the picture);

7th, refer to the above steps to make the other pair of the acrylic bead drop earrings.

Here is the final look of the acrylic bead drop earrings.

Do you like the acrylic bead drop earrings? Just with the above simple steps, you can also make a pair. The difficulty level of this DIY project is easy. Green hands can also have a try.