Easy DIY Project - How to Make a Pair of Rhombus Gold Wire Wrapped Earrings

There are many wire wrapped jewelry on our website. This article will add a pair of rhombus gold wire wrapped earrings to this category. To make the gold wire wrapped earrings, you just need to grasp some basic wire wrapping techniques. Well, let's see how to make the rhombus gold wire wrapped earrings.

Supplies needed in DIY the rhombus gold wire wrapped earrings:

14x7mm Clear Faceted Drop Glass Beads
0.5mm Gold Copper Wire
Golden Earring Hooks
1.5mm Golden Aluminum Wire
Needle Nose Plier
Round Nose Plier
Diagonal Plier

Instructions on how to make the rhombus gold wire wrapped earrings:

Step 1: Make the main part of the rhombus gold wire wrapped earrings

1st, cut a part of 1.5mm golden aluminum wire and twist it into a rhombus shape (as shown in the picture);
2nd, make a hoop on the two ends respectively and cut off the excess aluminum wire (as shown in the picture);
3rd, cut a part of 0.5mm gold copper wire and wrap it around the aluminum wire (as shown in the picture);
4th, add a golden earring hook on the top.

Step 2: Make the rest part of the rhombus gold wire wrapped earrings

1st, cut a part of 0.5mm gold copper wire and thread a 14x7mm clear faceted drop glass bead;
2nd, add it to one corner of the rhombus gold earring by wrapping the copper wire (as shown in the picture);
3rd, refer to the above steps to add a 14x7mm clear faceted drop glass bead to other three corners of the rhombus gold earring(as shown in the picture);

4th, refer to the above steps to make the other pair of the rhombus gold wire wrapped earrings.

Here is the final look of the rhombus gold wire wrapped earrings.

Just with the two simple steps above, you can also make such a pair of rhombus gold wire wrapped earrings. If you love the rhombus gold wire wrapped earrings or just want to learn wire wrapping techniques, you can try this easy DIY project. Come on and have a nice try!