Pandahall Kumihimo Bracelet Tutorial - How to Make a Handmade Green Bead Kumihimo Bracelet
Summary: Do you like Kumihimo bead bracelets? If yes, you may fall in love with this handmade green Kumihimo bead bracelet. Just check how to make this green Kumihimo bead bracelet.
Kumihimo bracelets are a popular type of bracelets. In today's DIy project, I'll share a green Kumihimo bead bracelet with you. With some green Mashan jade beads, clear bicone glass beads, white nylon threads, etc. and a mini Kumihimo disk, you can also make one. Well, let's see the detailed tutorial on how to make this green Kumihimo bead bracelet.
Supplies needed in DIY the green Kumihimo bead bracelet:
Instructions on how to make the green Kumihimo bead bracelet:
Step 1: Make the first part of the green Kumihimo bead bracelet
1st, cut 8 pieces of 1mm white nylon thread of equal length;
2nd, use black clamp to fix one end of the 8 nylon threads and make a knot;
3rd, cross the 8 nylon threads through the middle hole of the mini Kumihimo disk;
4th, insert the 8 nylon threads into the space on the two sides of the four black points of the mini Kumihimo disk one by one (as shown in the picture);
5th, refer to "Step2: Wrap the nylon threads" in the silver charm Kumihimo bead bracelet tutorial to move the nylon threads.
Step 2: Make the rest part of the green Kumihimo bead bracelet
1st, continue to make more wrapped knots;
2nd, thread about 15 6mm green round Mashan jade beads to 4 of the white nylon threads and make a knot on the end respectively. Then, thread about 15 6mm clear bicone glass beads to the other 4 white nylon threads and make a knot on the end respectively (as shown in the picture);
3rd, move the top green round Mashan jade bead on the bottom left nylon thread to the place near the knot. Then, move the bottom left nylon thread to the left side of the two upper nylon threads (as shown in the picture);
4th, refer to the above steps to move the beads and nylon threads (as shown in the picture);
5th, refer to Step 1 to make a corresponding braided part;
6th, make a knot with the nylon threads and cut off the excess nylon threads;
7th, combine the two ends of the green Kumihimo bead bracelet together by gluing the nylon threads onto the surface of the two holes of the 17x13mm platinum rhinestone magnetic clasp.
Here is the final look of the green Kumihimo bead bracelet.
This handmade green Kumihimo bead bracelet is very suitable to wear during the spring. Wearing this green Kumihimo bracelet, you'll look more vigorous. Wanna have a try, dear friends? There are also many other Kumihimo bracelets on our websites. You can also have a try!