Mother’s Day Gift on How to Make Chain Necklace with Glass Beads Heart Pendant

If you are searching for chain necklace, I think you can’t miss today’s Pandahall tutorial on how to make chain necklace with glass beads heart pendant! It looks really stunning! Now, please follow me to see together, hope you like it!

Materials needed for the chain necklace with heart pendant:

Brass Jump Rings
8mm White Round Pearl Beads
6x4mm Clear Faceted Glass Beads
0.3mm Copper Wire
0.3mm Tiger Wire
6x3mm Silver Flat Round Rhinestone Spacer Beads
Brass Bead Caps
Iron Jumprings
6mm Round Golden Stardust Beads
8mm Clear Round Glass Beads
Lobster Clasp
Brass Headpins
Cross Chains
Round Nose Pliers
Chain-Nose Pliers
Side Cutting Pliers
Scissors

Step 1: Make the base of the glass beads heart pendant

1st, trim off a proper length of tiger wire and slide four 8mm glass beads on it, then thread one side of the wire through the last glass bead on the other side wire;
2nd, slide three 8mm glass beads on the two sides of the wire like below and cross the two sides of the wire;
3rd, repeat the above way one time.

Step 2: Continue to add beads

1st, slide two 8mm glass beads on the wire and cross the two sides of the wire;
2nd, slide three 8mm glass beads on the wire like below and then cross the two sides of the wire;
3rd, thread one side of the wire through the next glass bead and then add a 6mm clear glass bead on it and continue to thread it through the next glass bead;
4th, continue to thread the wire through the next beads and slide beads on it like below.

Step 3: Finish the glass beads heart pendant

1st, add three bigger and one smaller glass beads on both side of the wire respectively and cross the two sides of the wire;
2nd, thread both side of the wire back through the next beads and slide a smaller glass bead on them separately;
3rd, continue to thread the both wire through the next bigger glass bead and two smaller and a bigger glass beads on them separately;
4th, thread back the two side wires through the bigger glass bead in the upper center and then trim off the excess wire.

Step 4: Finish the chain necklace

1st, slide a brass bead cap, a pearl bead and a flat rhinestone bead on a headpin;
2nd, make a loop of the headpin and hang it on the glass bead pendant;
3rd, thread two pieces of copper wire through the heart pendant like below and then hang a jumpring on both side of the heart pendant and trim off the excess wire;
4th, hang three strips of cross chains on the jumprings separately;
5th, hang a jumpring on both ends of the necklace and connect them by a lobster clasp.

Here is the final look of the chain necklace with glass beads heart pendant: .

Hey guys, how do you feel like the chain necklace with heart pendant? I believe it’s a very nice Mother’s Day gift! If you wanna try the Pandahall tutorial, go ahead! And if you have any questions, please feel free to ask me or leave a comment. Hope you love it and have a good time~