Free Tutorial on Making a Trendy Gold Chain and Green Glass Beaded Statement Necklace

Faceted glass beads and pearl beads always match perfectly in jewelry making projects. In this necklace design, I made green glass beaded statement design on a gold chain necklace. The main process is to make the beaded patterns for the statement, and the details are shown here.

Supplies in making the gold chain and green glass beaded statement necklace:

10mm Green Faceted Glass Beads
8mm Green Faceted Glass Beads
4mm Red Glass Pearl Beads
Gold Cross Chain
Gold Iron Bead Tip
Gold Jump Rings
Gold Iron Headpin
0.3mm Tiger Wire
Long Nose Plier
Round Nose Plier
Scissors

Instructions on making the gold chain and green glass beaded statement necklace:

Step 1: Bead the basic statement pattern

1st, snip off a piece of tiger wire (about 50cm), fold in halves and clap it in the bead tip and tighten the bead tip;
2nd, combine the wires, and thread them through a 10mm green faceted glass bead, a 8mm green glass bead, a 4mm red pearl bead, and a 10mm green glass bead in sequence;
3rd, separate the wires, and thread one wire through a red pearl, a 8mm green glass bead, a red pearl, a 10mm green glass bead, a red pearl, a 8mm green glass bead and finally a red pearl bead in sequence;
4th, thread the wire with beads on through the red pearl bead and the 10mm green glass bead on the original wires as shown;
5th, combine the wires again, and thread them through a 3mm red pearl, a 6mm green glass bead, a 3mm red pearl and a 10mm green glass bead;
6th, repeat the 3rd and 4th procedures to make another pattern.

Step 2: Finish the beaded statement patterns

1st, seperate the wires by sliding a 4mm red pearl, a 8mm green glass bead, a 4mm red pearl, a 8mm green glass bead, a 3mm red pearl bead, a 10mm green glass bead, a 4mm red pearl bead, a 8mm green glass bead in sequence as shown in the picture;
2nd, thread the wire with beads on through the second 10mm green glass bead and tighten up;
3rd, slide a 4mm red pearl bead, a 8mm green glass bead and a 3mm red pear bead on the wire, then thread it through the red pearl bead and the 10mm green glass bead beside the premier pattern;
4th, slide a red pearl bead, a 8mm green glass bead, a red pear bead, a 10mm green glass bead, then a red pearl bead, a 8mm green glass bead and a red pearl bead in sequence;
5th, thread the wire through the 10mm green glass bead and tighten as what you did in the 1st step;
6th, bead another pattern and then thread both wires through a 8mm green glass bead and a 10mm green glass bead;
7th, trim off the wires and clasp them in the bead tip in the end.

Step 3: Finish the gold chain statement necklace

1st, snip off a piece of golden cross chain, and attach each end to the bead tip with a jump ring respectively;
2nd, connect the necklace strand with a lobster clasp;
3rd, thread a 10mm green glass bead through a golden headpin, making a small loop at the end of the pin;
4th, hook the green glass bead dangle to the end of the gold chain and finish the necklace.

Here is the final piece of the trendy gold chain and green glass beaded statement necklace!

This gold chain and green glass beaded statement necklace is so trendy that I plan to wear it tomorrow! If you are also interested in it, then just have a nice try!