How to Make Delicate Beading Flower Bracelets with Pearl and Glass Beads

If you love flower bracelets, look here! Today’s Pandahall tutorial on how to make simple beading flower bracelets with pearl and glass beads will brighten your eyes! It looks pretty unique and delicate! Please follow me to see together~

Materials needed for the beading bracelet:

15x10mm Red Faceted Drop Glass Beads
6mm White Round Pearl Beads
4mm White Round Pearl Beads
3mm White Round Pearl Beads
2mm Brass Beads
5x3mm Red Faceted Drop Glass Beads
8x8x6mm Green Acrylic Rhinestone Beads
27x7x4mm Platinum Brass Watch Band Clasps
0.3mm Copper Wire
0.3mm Tiger Wire
Scissors

Step 1: Make the base of the beading bracelet

1st, trim off a proper length of tiger wire, then slide four 3mm pearl beads on it and thread one side of the wire through the last bead on other side;
2nd, add two 3mm pearl beads on one side of the wire and one 3mm pearl bead on other side of the wire and then thread one side of the wire through the last bead on other wire;
3rd, cut off another piece of tiger wire and thread it through one pearl bead, please see its specific place in the showing picture;
4th, slide two 3mm pearl beads on the later wire and thread it though the upper layer;
5th, slide one 3mm pearl bead on the next two tiger wire separately and thread one piece of wire through the pearl bead on other wire;
6th, add a 4mm pearl bead on the left upper wire.

Step 2: Add pearl beads

1st, add one 3mm pearl bead on both side of the down wire separately;
2nd, add two 3mm pearl beads on both side of the upper wire separately and thread the down wire through the last bead on the upper wire;
3rd, add three 3mm pearl beads on both left and right wire and then cross the left two pieces wire and right wire separately;
4th, after the length is enough, add a 4mm pearl bead on one piece of wire and then thread other piece of wire on another side through it, please see the showing picture.

Step 3: Finish the oval beading part

1st, add a 3mm pearl bead on both the middle two pieces wire;
2nd, add a 3mm pearl bead on the right and one piece of middle wire;
3rd, add a 3mm pearl bead on the left and one piece of middle wire;
4th, repeat the same way one time and slide a 4mm pearl bead on the upper wire.

Step 4: Start to make the heart part

1st, add three 3mm pearl beads on the right two pieces of wire and cross them;
2nd, add three 3mm pearl beads on the left two pieces of wire and cross them;
3rd, combine the left and right parts together by threading one side of the wire through other side wire;
4th, cut off another piece of tiger wire and thread it though the oval beading part and slide brass beads on it like the showing picture below.

Step 5: Finish the heart part

1st, make another part of the heart in the same ways mentioned in Step 4;
2nd, trim off the excess wire and make it neater.

Step 6: Make the outline of the beading bracelet

1st, make another heart and oval beading part in the same ways as before;
2nd, combine the two heart and oval beading parts together and forming a flower shape in the center;
3rd, trim off a piece of tiger wire and slide a 3mm pearl bead on it and then thread both side of it through a bigger red drop glass bead;
4th, add the red glass bead on the heart and oval part by threading the wire though the horizontal bigger pearl beads and then trim off the excess wire;
5th, repeat the same ways to add another red drop glass bead.

Step 7: Make the red flower ornament

1st, cut off a proper piece of copper wire and then slide a 4mm pearl bead on it;
2nd, thread both side of the copper wire through a green acrylic rhinestone bead;
3rd, continue to add nine 4mm pearl beads on the copper wire like below;
4th, trim off a piece of copper wire and thread it through two pearl beads;
5th, slide a smaller red drop glass bead and a brass bead on it then thread it through the next pearl bead;
6th, continue to add other nine red glass and brass beads and trim off the excess wire.

Step 8: Combine the flower ornament and the heart and oval part together

Add the red flower part on the heart and oval part through copper wire.

Step 9: Finish the beading flower bracelet

1st, trim off two pieces of tiger wire and hang them on the brass watch band clasps respectively;
2nd, slide three 6mm pearl beads on the wire separately and thread the wire through the left and right pearl beads.

Time for the final look of the beading flower bracelet:

Wow, what a delicate beading flower bracelet! It attracts soooooo much! How do you feel like it? If you wanna learn the Pandahall tutorial, you can take action! And if you have any confusion, please feel free to ask me or leave a comment! Hope you nice try and a wonderful day!