How to Make Your Own White Angel Pendant Necklace at Home
Summary: In this Pandahall tutorial, I'll share a white angel pendant necklace with you. Hope you like this handmade angel pendant necklace.
Creating angel ornaments to adorn the home is a wonderful weekend project. In this DIY project, you can see a white angel pendant necklace. The main part is making the white beaded angel. Well, follow me to see how to make your own angel pendant necklace at home.
Supplies needed in making the handmade angel pendant necklace:
6mm White Faceted Abacus Glass Beads
6mm White Round Pearl Beads
4mm Yellow Round Pearl Beads
30x10mm White Drop Pearl Beads
18x7mm White Drop Pearl Beads
12mm Black Round Beads
Rhinestone Bar Spacer
Golden Bead Caps
0.3mm Copper Wire
Silver Jump Rings
Silver Twisted Chain
Silver Lobster Clasp
Round Nose Plier
Instructions on how to make the handmade angel pendant necklace:
Step 1: Make the white bead angel pendant
1st, cut a piece of 0.3mm copper wire. Then, thread 5 6mm white faceted abacus glass beads and a 4mm yellow round pearl bead in sequence to it;
2nd, cross the left copper wire through the rightmost white faceted abacus glass bead;
3rd, thread 3 6mm white faceted abacus glass beads to the same copper wire;
4th, thread a 4mm yellow round pearl bead to the copper wire. Then, cross the copper wire through the adjacent 6mm white faceted abacus glass bead;
5th, wrap the cooper wire onto the white faceted abacus glass bead and cross the copper wire through the same white faceted abacus glass bead again (as shown in the picture);
6th, thread a 18x7mm white drop pearl bead to the copper wire. Then, fix it by wrapping the copper wire with the other copper wire(as shown in the picture);
7th, thread a 30x10mm white drop pearl bead to a golden headpin;
8th, combine the 30x10mm white drop pearl bead with the bead pattern made above by wrapping the copper wires;
9th, refer to the 1st step to the 6th step to make a corresponding bead pattern. Then, add it on the right side of the 30x10mm white drop pearl bead (as shown in the picture).
Step 2: Make the rest part of the handmade angel pendant necklace
1st, add a rhinestone bar spacer above the angel pendant;
2nd, add a 12mm black round bead, a golden bead cap and a 6mm white round pearl bead in sequence;
3rd, make a hoop with the golden headpin and cut off the excess golden headpin. Then, cut two pieces of silver twisted chain and combine them with the angel pendant through the hoop. Connect the two ends of the angel pendant necklace through silver jump rings and silver lobster clasp.
Here is the final look of the handmade angel pendant necklace.
This handmade angel pendant necklace makes a wonderful and inexpensive present sure to be appreciated by their recipients. With a little practice, the white angel pendant necklace should be easy to create. You cans also use it as decorative ornaments around the house. Have a try, dear friends!