Detailed Steps on Making a Blue and White Snowflake Large Pendent Necklace for Wedding

Summary: This is a detailed tutorial on making a blue and white snowflake large pendent necklace for wedding. By following the steps below, you can also make this elegant and beautiful necklace piece.

Detailed Steps on Making a Blue and White Snowflake Large Pendent Necklace for Wedding

Many of my friends got married recently. So I was inspired and decided to make a necklace for wedding. Before making this snowflake pendent necklace, I chose some blue and transparent glass drop beads and pearl beads. Also, as a necklace for wedding, I added a heart link for this necklace. Now let's check the detailed steps.

Supplies in making the blue and white snowflake large beaded pendent necklace for wedding:

6mm White Pearl Beads
8mm White Pearl Beads
10mm White Pearl Beads
12X8mm Blue Glass Faceted Drop Beads
12X8mm Transparent Glass Faceted Drop Beads
12X8mm Glass Pearl Drop Beads
2mm Blue Glass Bugle Beads
Iron Jump Rings
Iron Heart Link
2mm Brass Bead Spacers
0.3mm Copper Wire
0.3mm Tiger Wire
Scissors
Long Nose Plier

Supplies in making the blue and white snowflake large beaded pendent necklace for wedding:

Instructions on making the blue and white large beaded pendent necklace for wedding:

Step 1: Stitch a pearl necklace strand

1st, snip off a piece of 0.3mm tiger wire (about 100cm) and then slide a 6mm white pearl bead, a 8mm pearl bead and a 10mm pearl bead to the middle;
2nd, cross both ends of the wire through another 8mm white pearl bead and tighten;
3rd, thread the left wire through a 6mm white pearl bead while the right wire through a 10mm white pearl bead, then cross both wires through a 8mm pearl bead and tighten;
4th, repeat this beading pattern and stitch the necklace strand until it reached a proper length that fits you well.

Stitch a pearl necklace strand

Step 2: Finish the pearl necklace strand

1st, thread the excessive wires backward long the beads in order to fix the wires and finally trim off them;
2nd, thread a jump ring through each pearl bead on the strand end, and connect them with an iron heart link.

Finish the pearl necklace strand

Step 3: Bead the basic unit of snowflake pattern

1st, snip off a piece of 0.3mm copper wire (about 75cm), slide a 6mm white pearl bead to the middle, then thread both wires through a 12x8mm pearl drop bead;
2nd, cross both wires through a 6mm white pearl bead this time and tighten up;
3rd, thread each wire through 4 6mm pearl beads and cross them through the 6mm pearl bead on the other end of the pearl drop bead as shown.

Bead the basic unit of snowflake pattern

Step 4: Add glass drop beads

1st, thread one wire through a transparent glass drop bead and a bead pacer, then thread it backward through the glass drop bead and tighten;
2nd, thread the other wire through a blue glass bead and a bead spacer, then thread it backward through the blue glass drop bead and tighten;
3rd, thread each wire through the 6mm pearl bead beside them, and thread the transparent glass bead and spacer respectively;
4th, repeat the pattern and finish the blue and transparent glass drop bead layer.

Add glass drop beads

Step 5: Add pearl and seed bead fringe

1st, separate the wires, thread the right wire in the picture through a bead spacer, a 8mm pearl and a spacer;
2nd, thread the wire through the next spacer on the top of the glass drop bead, then continue to thread a spacer, a pearl bead and a spacer again through the next spacer bead on the top of the glass drop bead;
3rd, repeat the procedures until finishing the pearl and seed bead fringe.

Add pearl and seed bead fringe

Step 6: Finish the beaded snowflake pendent

1st, thread one wire through a blue bugle bead, a 6mm white pearl bead and a pacer, then wrap and thread the wire backward through the pearl bead;
2nd, thread this wire through another blue bugle bead and then through the next pearl bead on the fringe;
3rd, thread the wire through a blue bugle bead, a 6mm white pearl bead and a seed bead again, and thread the wire backward through the pearl bead and the next pearl bead on the fringe;
4th, repeat this pattern and finish the last layer of the snowflake pattern.

Step 7: Finish the whole blue and white snowflake big beaded pendent necklace:

Snip off a short piece of copper wire, and tie the snowflake pendent to the necklace strand.

Finish the whole blue and white snowflake big beaded pendent necklace:

Look at the final piece of this blue and white big beaded snowflake pendent necklace! How amazing beautiful and elegant it is!!

Look at the final piece of this blue and white big beaded snowflake pendent necklace! How amazing beautiful and elegant it is!!

I was just surprised by the beauty of this pearl and glass beaded snowflake pendent necklace! The color blue and white are necessary for a wedding, and pearl and glass are the best material for a nobility and purity definition. If you are also attracted by this bridal pendent necklace design, then do have a try!

400 / 400