How to Make Christmas Beaded Earrings with Green and Red Glass Beads

I have made a lot of Christmas ornaments before, and they were so popular. Today’s jewelry is a pair of Christmas beaded earrings. If you wear on these shining DIY Christmas earrings, you can draw a lot of attentions from others. Now, let’s see how to make these Christmas earrings with glass beads.

Supplies in making this pair of earrings with glass beads:

0.3MM Copper Wire (about 180CM)
8MM Red Glass Beads
6MM Red Glass Beads
2MM Green Seed Beads
Jump Rings
Earring Hooks
Scissor

 

Step 1: Make the main drop part

1st, cut a piece of 0.3mm copper wire (with a length about 180cm), thread 3 green seed beads, then thread the left wire through the upper two seed beads;
2nd, thread 4 green seed beads to the 2 wires respectively, thread the wire ends through the last but one and the last but two and thread the wire end through the last but one and the last but three seed beads;
3rd, thread 4 green seed beads to the 2 wires respectively again, then thread the wire ends through the last but one seed bead respectively, and thread 2 wires 2 green seed beads as pictured.

 

Step 2: Add more beads

1st, thread the 2 wires a 8mm red glass bead, then thread them 3 green seed beads respectively, and thread the wires through the last but one seed bead respectively;
2nd, thread 5 green seed beads to the 2 wires, then thread the 2 wires through the third bead to the toppest bead;
3rd, thread the 2 wires 4 green seed beads and tighten up, then cut a piece of copper wire, through it from the 8mm red glass bead .

 

Step 3: Add more beads and make the final design

1st, thread the wire 2 6mm red glass beads beside the 8mm red glass bead, then tread one of copper wire through a 6mm glass bead;
2nd, thread 2 green seed beads to the 2 wires, then thread 2 green seed beads to wires respectively, and thread the 2 wires from the second bead respectively as pictured;
3rd, thread 5 green seed beads to the 2 wires, then thread the wire ends from the 3rd bead respectively;
4th, thread 2 green seed beads to the 2 wires and tighten up;

 

5th, link a jump ring and an earring hook with the bead drop.

 

Repeat all the steps to make the other pair of Christmas beaded earrings.
Here is the final look of the Christmas beaded earrings.

 

Now, the DIY Christmas earrings are finished. Do you love this pair of Christmas beaded earrings? All the steps of my tutorial look a little complex, but if you follow my detailed introduction and be careful when learning how to make earrings with glass beads, I believe you can also make these Christmas beaded earrings with green and red glass beads quickly.