How to Make an Adjustable Red Woven Bead Bracelet

In this jewelry DIY video, I'll show you how to make an adjustable red woven bead bracelet. Learning how to make this adjustable woven bracelet is rewarding and only requires minimal supplies. Now, let's begin.

Music Credits: Pachelbel - Canon In D

To get started, you will need:

4mm Red Pearl Beads
1mm Red Nylon Thread

1mm Black Nylon Thread
Iron hairclip
Stainless-Steel Scissor
Lighter
 

How to make a red woven bead bracelet?

Step 1: Cut 4 pieces 35cm black nylon thread, and then cut 4 pieces 35cm red nylon thread.

Step 2: Select 2 black nylon threads and 2 red nylon threads, then combine the four nylon threads together by making a knot on one end ( to make it adjustable, please leave 5cm to 6cm on this end). Make a knot on one end of the other 4 nylon threads (again, please leave 5cm to 6cm on this end).

Step 3: Use an iron hairclip to clamp the two knots made just now. For the left four nylon threads, adjust the sequence of the four nylon threads until the two black nylon threads are on the two sides of the two red nylon threads.

Pass the left black nylon thread through the right side of the two red nylon threads and keep the right black nylon thread onto it. Then, tie a knot by crossing the two black nylon threads and tighten.

Pass the right black nylon thread through the left side and keep the left black nylon thread onto it. Then, tie a knot by crossing the two black nylon threads and tighten.

Refer to the above two steps to make two knots on the right four nylon threads.

Thread 2 4mm red pearl beads to the third black nylon thread (count from left to right).Thread 2 4mm red pearl beads to the second black nylon thread. Pass a red nylon thread on the left through the right side of the two middle black nylon threads and keep a red nylon thread on the right onto it. Then, tie a knot by crossing the two red nylon threads and tighten.

Pass the red nylon thread on the right through the left side of the two middle black nylon threads and keep the left red nylon thread onto it. Then, tie a knot by crossing the two red nylon threads and tighten.

Thread 3 4mm red pearl beads to the rightmost black nylon thread（to make the red pearl beads thread easily, please use a light to smooth the nylon thread end.）Thread 3 4mm red pearl beads to the leftmost black nylon thread.

For the left four nylon thread, pass the first black nylon thread through the right side of the two red nylon threads and keep a black nylon thread on the right onto it. Then, tie a knot by crossing the two black nylon threads and tighten.

Pass the second black nylon thread through the left side of the two red nylon threads and keep the left black nylon thread onto it. Then, tie a knot by crossing the two black nylon threads and tighten.

For the right four nylon thread, refer to the above steps to make two knots. Pass the second red nylon thread through the right side of the two black nylon threads in the middle and keep the third red nylon thread onto it. Then, tie a knot by crossing the two red nylon threads and tighten.

Pass the third red nylon thread through the left side of the two black nylon threads and keep the second red nylon thread onto it. Then, tie a knot by crossing the two red nylon threads and tighten.

Thread 2 4mm red pearl beads to the third black nylon thread. Thread 2 4mm red pearl beads to the second black nylon thread. Thread 3 4mm red pearl beads to the first black nylon thread. Thread 3 4mm red pearl beads to the fourth black nylon thread.

For the left four nylon threads, pass the first black nylon thread through the right side of the two red nylon threads in the middle and keep the second black nylon thread onto it. Then, tie a knot by crossing the two black nylon threads and tighten.

Pass the second black nylon thread through the left side of the two red nylon threads and keep the first black nylon thread onto it. Then, tie a knot by crossing the two black nylon threads and tighten.

For the right four nylon thread, refer to the above steps to make two knots. Pass the second red nylon thread through the right side of the two black nylon threads and keep the third red nylon thread onto it. Then, tie a knot by crossing the two red nylon threads and tighten.

Pass the third red nylon thread through the left side of the two black nylon threads and keep the second red nylon thread onto it. Then, tie a knot by crossing the two red nylon threads and tighten.

For the left four nylon thread, pass the first black nylon thread through the right side of the two red nylon threads in the middle and keep the second black nylon thread onto it. Then, make a loop by crossing the two black nylon threads and tighten.

Pass the second black nylon thread through the left side of the two red nylon threads and keep the first black nylon thread onto it. Then, tie a knot by crossing the two black nylon threads and tighten.

For the right four nylon threads, refer to the above steps to make a loop and knot.

Step 4: Repeat the above steps to make enough patterns.

Step 5: Cut the excess part of two nylon threads and use light to smooth the ends. Cut the excess part of the four long nylon threads (make the left part about the same length with that of the other end).

Step 6: Cut a piece of 1mm black nylon thread. Hold the two ends of the bracelet together and tie 8 knots with the black nylon thread. Then, cut the excess parts of the black nylon thread and use the light to smooth the ends. Tie a knot on the end of the eight nylon threads one by one.

Wow, this red woven bead bracelet is done! This red woven bead bracelet is a popular pattern for homemade friendship bracelets. By using different colors of threads, you can create a bright and unique bracelet. You can give this adjustable red bracelet to people as gifts. So, try to follow the tutorial above and try to make one.

For more free Pandahall beading video tutorials, just stay tuned!