Wedding Jewelry Ideas on How to Make Stunning Necklace with Crystals

In this diy necklace tutorial, I will teach you how to make necklace with crystals. To diy this wedding necklace, I choose transparent crystal as the main material. It only looks so elegant and expensive. Come and follow me step by step!

Materials needed in diy wedding crystal chunky necklace:

10MM Transparent Glass Beads
8MM Transparent Glass Beads
8MM Czech Glass Beads
6MM Czech Glass Beads
4MM Czech Glass Beads
2MM Seed Glass beads
Silver Chains
Eyepins
Headpins
Jumprings
Lobster Clasp

Instructions for diy wedding crystal chunky necklace:

Step 1: Make bead and chain link for the wedding crystal chunky necklace

1st, slide an 8mm Czech bead and a 2mm seed bead onto a headpin, cut off about 40cm chain, thread the headpin to the middle circle of the chain, add a 2mm seed bead, a 10mm transparent bead, and a 2mm seed bead onto the headpin;
2nd, cut off another 40cm chain, thread the headpin the middle circle of the chain, add a 2mm seed bead and an 8mm Czech bead, cut off the extra part and make a loop at the end;

3rd, do another two bead and chain link at two sides in the same way, remember far about 15mm from the middle bead and chain link;
4th, repeat the process to do another 10 bead and chain links, remember the distance between every two bead link is 15mm.

Step 2: Make the bead links for the wedding crystal chunky necklace

1st, slide a 6mm Czech bead, an 8mm Czech bead, and a 6mm Czech bead onto an eyepin, cut off the extra part and make a loop at the end, do another four bead links as the same, then do two 8mm Czech bead links and two 6mm Czech bead links in the same method;

2nd, attach these bead links onto the bead chain links as picture shows, connect the longest five bead links to the middle five bead and chain links, then connect two 8mm Czech bead links adjacent to the previous bead link, at last connect two 6mm Czech bead links to the bead and chain link.

Step 3: Make the beaded fringe for the wedding crystal chunky necklace

1st, slide a 10mm transparent bead and an 8mm Czech bead onto a headpin, add a 6mm Czech bead and a 4mm Czech bead onto it, cut off the extra part, and make a loop at the end;
2nd, slide an 8mm transparent abacus bead, an 8mm Czech bead and a 6mm Czech bead onto a headpin, then do it in the same method, in total make two;
3rd, slide a 8mm transparent abacus bead and an 8mm Czech bead onto a headpin, then do it in the same method, in total make ten;

4th, attach these bead fringe onto the bead links as pictures show.

Step 4: Finish the wedding crystal chunky necklace

Cut off the extra chains to fix your neck, then use jumprings and a lobster to connect both ends of chains.

Here is the final look of wedding crystal chunky necklace:

Great! This wedding crystal necklace has been finished! Create this stunning diy wedding necklace to wear on your wedding day. It’s a cinch to make and only looks expensive! Just have a nice try!