How to Make Infinity Beaded Hoop Earrings with Wire of Tiger Tail

Today I want to share this infinity hoop earrings with you. Thanks to the white tiger tail wire that is like a solitary enveloped by the piles of copper wire and aluminum wires, I came up with an idea of making a beaded hoop earrings in infinity pattern.

Necessities for the beaded infinity hoop earrings:

0.38mm white tiger tail wire
6mm white glass pearls
6mm clear bicone glass beads
6mm oval metal beads
Clear drop glass beads
Crimp beads
Crimp bead covers
Silvery earring hooks
Round nose plier
Wire cutter plier
Side cutting plier

How to make beaded hoop earrings with wire:

Step 1: Make infinity hoop with wire

1st, cut a 25cm length of tiger tail wire, slide onto wire in the order of 1 crimp bead, 1 pearl, 1 metal, 1 drop glass bead, again 1 metal and 1 pearl bead;
2nd, loop the wire clockwise and back it through the crimp bead, so the 3.5cm large loop is done;
3rd, loop the wire counter-clockwise and thread it through the crimp bead again, then the 1.5cm loop is done;
4th, crimp down the crimp bead with plier;
5th, trim off the tail at the left side of the crimp bead;
6th, add bead cover to hide the crimp bead.

Step 2: Make beaded dangle

1st, slide 1 pearl, 1 glass bicone onto the tail at the right side;
2nd, add a crimp bead 2.5cm away from the bead cover;
3rd, crimp it down and hide it with another bead cover;
4th, trim off excess tail.

Step 3: Finish beaded hoop earrings

Open the loop under earring hook and attach it onto the infinity hoops.

Finally the beaded hoop earrings look like this:

Okay, I have completed the “how to make beaded hoop earrings with wire” project. I believe this pair is quite elegant and all-matching. As plain as it looks, the infinity hoop earrings will help you stand out among crowds.