How to Make Creative Dangle Hoop Earrings with Ombre Crystal Beads and Wire

Summary: This is a fun and creative way to turn the blank hoop earrings into new pair of fascinatingly dangle hoop earrings, by mixing up a variety of ombre crystal beads and brass wire.

How to Make Creative Dangle Hoop Earrings with Ombre Crystal Beads and Wire

These dangle hoop earrings are a breeze to make for those who long for a pair of stylish and retro earrings. Furthermore, a set of ombre crystalized glass beads are used in the design to allow it be more stunning and eye-catching. Can’t wait to make one? Check out this tutorial to get started with making your own dangle earrings.

Supplies needed for dangle hoop earrings:

8mm Glass Pearl Beads
6mm Bicone Glass Beads
Bead Caps
Brass Hoop Earrings
Earring Hooks
0.5mm Brass Wire
Side Cutting Pliers
Wire Cutter Pliers
Round Nose Pliers

Supplies needed for making these dangle hoop earrings

How to start these dangle earrings?

Step 1: Modify the brass hoop earrings

1st, take one hoop earring and grasp the end with loop by using fingers;
2nd, bent the loop upwards into a 90 degree angel;
3rd, wrap the other end around the neck for a closed hoop;
4th, repeat the three processes above for another 3 pieces.

Modify the brass hoop earrings

Step 2: Combine two hoops with beads and wire

1st, cut a 30cm piece of brass wire and anchor one end onto hoop earring by wrapping 2 or 3times;
2nd, slide one light-color bicone bead. Then, add another hoop earring and wrap the wire around in same way;
4th, direct the wire to the left side and fasten by wrapping 2 or 3 times;
5th, slide another bicone bead and do wrapping again;
6th, repeat adding beads between two hoop earrings and during what you may need to arrange the color of beads from light to deep;
7th, make the other component in same way.

Combine two hoops with beads and wire

Step 3: Make a dangle with bead and bead cap

1st, take a short piece of brass wire and thread through either loop of the two hoop earrings;
2nd, make a wrapped loop;
3rd, slide the pearl bead, bead cap and one bicone bead in order. Finally, secure the beads by another wrapped loop;
4th, repeat the same actions for the other component.

Make a dangle with bead and bead cap

Step 4: Attach the earring hooks

Open the loop on earring hook and hang on the prepared hoop earring dangles!

Attach the earring hooks

Done!

finished Dangle Hoop Earrings

Once you had them finished, you’ll get a pair of dangle hoop earrings that is not exactly like any others’ in the world. The only challenge might be combine the two blank hoop earrings with a row of beads. So, just be patient and I’m sure you’ll love these ombre crystal earrings!

400 / 400